Skip to main content
Better Call NAWL817-504-4230👤 Dealer Login
← Back to blog

Plumbing Supply Warehouse Racking in North Texas

November 18, 2026

Plumbing Supply Warehouse Racking in North Texas

Plumbing supply warehouses work best with cantilever rack for pipe and long fittings, selective pallet rack for water heaters, fixtures, and pallets of boxed goods, and wire-decked bays for fittings. Separating long goods from palletized goods keeps handling safe and prevents damaged pipe.

A plumbing distributor holds one of the most mixed inventories in the building trades. A single order might include 20-foot lengths of pipe, a water heater, a pallet of fittings, and a box of small parts. Each moves differently.

How do you store pipe in a plumbing warehouse?

Pipe is long, rigid in some materials and flexible in others, and awkward to stack on pallets. Cantilever arms support pipe along its length and leave the front open for forklift access. Put heavier pipe, such as cast iron or steel, on lower arms and lighter plastic pipe higher up.

Arm length should match your longest common stock, and arm spacing should keep pipe from bowing. The cantilever arm capacity guide helps you set capacity, and our posts on cantilever in Dallas and Fort Worth show typical layouts. If you store PVC outdoors or in unconditioned space, read our guide on PVC in Texas heat too.

What goes on pallet rack?

Water heaters

Typical storage
Pallet rack, lower levels
Notes
Heavy and tall; confirm pallet height and weight

Toilets, tubs, vanities

Typical storage
Pallet rack
Notes
Check frame depth for large fixtures

Boxed fittings and valves

Typical storage
Pallet rack with wire decking
Notes
Decking supports mixed cartons

Bagged or boxed consumables

Typical storage
Pallet rack
Notes
Easy to slot and restock

Water heaters and fixtures can exceed standard pallet footprints. Measure the real dimensions, and consider frame depth choices so loads do not overhang. For heavy pallets near capacity limits, see how pallet rack load ratings work.

How should I handle small parts?

Fittings and valves rarely belong on pallet beams. Use wire-decked bays or shelving so loose boxes do not fall through. Our accessories checklist and wire decking guide cover what to add. If cartons can fall from rear levels, consider back guards.

What layout works near the counter?

Plumbing contractors often pick up orders early in the morning. Put fast-moving fittings and fixtures near the counter or will-call area and keep long pipe near the dock where forklifts work. A good layout separates contractor foot traffic from lift traffic. Our layout guide covers aisle planning.

What should I consider for forklift access?

Cantilever aisles often need space for long loads to swing as the forklift turns. Pallet aisles depend on equipment type. See aisle width by forklift type before finalizing your layout.

Where does NAWL fit?

NAWL stocks pallet rack and cantilever rack at Venus, TX. Stock orders dispatch within 48 hours, and we serve both dealers and end users. If you supply plumbing to builders, you may also want the full pallet rack and cantilever product overviews to compare sizes.

Frequently asked questions

Can I use one rack type for everything? You can, but it usually wastes space or damages product. Pipe on pallet rack and fixtures on cantilever both create problems.

What if I stock both PVC and metal pipe? Use separate arm levels or bays, with heavier metal pipe lower. Check each arm's rating.

Do I need to worry about moisture? Plumbing goods are generally durable, but coatings and packaging matter in humid conditions. Read about coating choices for Texas if you store outdoors.


Setting up a plumbing supply warehouse?

Send your product list and longest stock, and we will help you split it across rack types.

Request a Quote →