Products/Cantilever

Cantilever

Columns, bases, and arms for cantilever rack systems.

18 SKUs · Dealer stock · NAWL Blue

About NAWL Cantilever

NAWL cantilever rack is engineered for the long, heavy, and awkward loads conventional pallet rack can’t handle — lumber, pipe, tubing, steel bar, conduit, sheet goods, and oversized furniture. Structural-steel columns mount onto wide bases and accept bolt-on adjustable arms, giving the operator a clear, column-free face to load with a forklift or sideloader.

Stock SKUs cover 12′ and 16′ columns rated 12,980 lb and 11,660 lb per side, 48″ and 60″ bases, and straight 48″ and 60″ arms rated 2,640 lb and 3,260 lb each. Configure single- or double-sided runs; arms adjust on 4″ vertical increments for product mix changes without a structural rebuild.

Every component ships in NAWL blue powder-coat, anchor-ready, and designed and tested to RMI / ANSI MH16.3. Dealers buy NAWL cantilever because stock columns and arms ship in days — not the 8–10 weeks domestic mills typically quote — and because bracketed dealer pricing for approved dealers makes lumberyard, pipe-house, and service-center quotes competitive on the first pass.

Cantilever Rack Capacity

ComponentTypical capacityNotes
8' column (9.7" profile)Up to 14,300 lbs per sideDrops as arm length increases
12' column (11.7" profile)Up to 18,170 lbs per sideDrops with arm length and height
Cantilever arm2,640–3,960 lbs per armBy arm length and spec

Ranges from NAWL's engineered cantilever capacity chart. Always confirm the rating for your exact configuration.

What Cantilever Rack Stores

Lumber & sheet goods

Long loads sit across arms with no front uprights in the way.

Pipe, tube & bar stock

Arms set in 4" increments to fit bundle heights.

Steel & metal service

Heavy-profile columns carry dense long loads per side.

Furniture & rolled goods

Open front makes forklift or hand loading fast.

Cantilever Rack FAQs

Single-sided or double-sided?

Single-sided runs along a wall. Double-sided puts arms on both sides of the column for a center-aisle run and roughly doubles storage per footprint. Read the guide →

How do I read capacity per side?

Capacity is rated per side of a column and drops as arms get longer. Check the column, the arm and the base against your heaviest load. Read the guide →

48" or 60" arms?

Arm length should match load depth. Longer arms carry less per arm, so don't oversize. Read the guide →

What base size do I need?

Match the base to your deepest arm so the rack stays stable under load. Read the guide →

What ships fast?

Stock cantilever ships quick from Venus, TX. See which sizes are in the stock lineup. Read the guide →

Skip to main content
Better Call NAWL817-504-4230👤 Dealer Login

Cantilever Rack — For Anything Long, Heavy, or Awkward

Cantilever is the right answer when pallet rack isn't. Lumber, pipe, sheet stock, bar steel, conduit, extrusions — anything that's longer than it is wide loads cleaner onto cantilever arms than into upright bays.

NAWL stocks 12' and 16' columns, 48" and 60" arms and bases, and all the bracing in Venus, TX.

When to choose cantilever

If your loads are longer than 8' or you're trying to selective-pick from a single end, go cantilever. If your loads palletize cleanly, stay on pallet rack.

Columns, arms, and bases

Our 12' columns carry 12,980 lbs per side and our 16' columns carry 11,660 lbs per side. 48" arms rate 2,640 lbs each; 60" arms rate 3,260 lbs. Bases match the deepest arm and bolt to the floor.

Single vs double sided

Single-sided runs against a wall and uses less floor space. Double-sided doubles your storage per column but needs aisle access on both sides. Most lumber yards run double-sided down the middle and single-sided against walls.

Outdoor cantilever

Cantilever lives outdoors as often as indoors. Galvanized finish is available on all stock SKUs; we'll quote painted-and-sealed for custom colors. Anchor to a 6" minimum concrete pad.

Why dealers choose NAWL quick ship

Cantilever weighs more per piece than pallet rack and freight matters. Our Texas warehouse cuts transit time to most Sun Belt metros by 1–2 days versus East Coast suppliers.

FAQ

What's the capacity of a 48" arm?
2,640 lbs at the arm tip, evenly distributed. Add column count for your full row capacity.
Can cantilever rack live outdoors?
Yes — specify galvanized or painted finish at quote. Anchor to a minimum 6" concrete pad.
Single or double sided for a lumber yard?
Most yards run double-sided in the center of the building and single-sided along the walls. We'll lay out the floor plan with you.
What's the heaviest column you stock?
Our 12' columns rate 12,980 lbs per side. Heavier columns are available on a 7–10 day lead time.

Quick-ship inventory · Venus, TX

NAWL ships pallet rack, cantilever, wire decking, and accessories from our Texas warehouse — most stock orders go out in 48 hours.