Skip to main content
Better Call NAWL817-504-4230👤 Dealer Login
← Back to blog

Pallet Racking in Lewisville and Flower Mound

November 16, 2026

Pallet Racking in Lewisville and Flower Mound

Lewisville and Flower Mound warehouses usually start with selective pallet rack because it keeps every pallet reachable as product mix changes. Choose frame depth to match your pallets, confirm clear height and slab condition, and order stock sizes where possible, since stock orders dispatch from Venus, TX within 48 hours.

These two cities sit between the Dallas core and the Denton corridor, close to DFW Airport and to I-35E. Many businesses here are small to mid-size: distributors, contractors' suppliers, light assembly, and e-commerce sellers who needed more room than a retail space could give them.

What makes this area different from central Dallas?

Buildings tend to be newer and smaller, often in business parks with 24 to 32 foot clear heights in some buildings and lower in older ones. Tenants often lease a single bay, which brings landlord rules into play. If you are leasing, read our tenant guide to installing rack in a leased DFW warehouse before you order.

Smaller footprints also change layout math. When floor area is tight, every foot of aisle width matters. Compare lift options in our aisle width guide.

Which rack type should a Lewisville or Flower Mound operator choose?

Mixed SKUs, frequent picking

Likely rack
Selective teardrop
Reason
Every pallet accessible

Tight footprint, few SKUs

Likely rack
Deeper lanes such as double-deep or drive-in
Reason
More positions per square foot

Pipe, lumber, or long stock

Likely rack
Cantilever
Reason
Open front, no pallets needed

Small parts alongside pallets

Likely rack
Rack with wire decking
Reason
Supports cartons and mixed loads

The comparison of selective vs. drive-in rack explains the trade between access and density.

What should I measure before ordering?

Before sending a quote request, gather:

  • Clear height under the lowest obstruction, which in newer buildings is often the sprinkler line
  • Column spacing and door locations
  • Pallet dimensions and loaded weight
  • Slab thickness, strength, and condition
  • The lift truck you will use

Our measuring guide shows how to take the measurements a supplier needs.

How should I think about sprinklers and fire code?

Newer business parks often have modern sprinkler systems designed for specific storage heights. Putting up rack that exceeds those assumptions can trigger problems with inspectors or insurers. Ask the landlord for the sprinkler design, and see the 18-inch sprinkler clearance explainer for the basics.

How fast can rack reach Lewisville?

Stock orders dispatch from our Venus, TX location within 48 hours. Venus is in Johnson County, about 31 miles from Dallas and Fort Worth, so freight to Denton County is a regional haul. Custom paint and oversize orders typically ship within 7 to 10 business days. If your freight carrier prefers to pick up, you can release the order to them at Venus.

What about permits?

Lewisville, Flower Mound, and other Denton County cities may each handle rack permits differently. Ask the building department and fire marshal for their requirements before ordering. Our permit overview for DFW cities lists what to ask.

How should I plan growth in a multi-tenant building?

Many Lewisville and Flower Mound warehouses are multi-tenant flex or distribution buildings, where you share docks, parking, and sometimes sprinkler design with neighbors. Before you add rack, confirm what your lease allows, who controls the sprinkler system, and whether your insurer needs notice. Choose standard beam lengths and frame depths so you can add or move bays without ordering one-off parts. Leave room between your rack and the demising wall for inspection access, and keep column protectors on any upright that faces a shared drive aisle. If you expand into an adjacent suite later, matching components keeps both spaces compatible.

Frequently asked questions

Can a small business buy rack without a dealer? Yes. Retail purchase is available through the public cart or a quote request. Dealers can arrange wholesale pricing with a signed dealer agreement.

How do I plan for growth in a small bay? Use standard stock sizes, keep an eye on aisle width, and leave room to add bays. See planning rack expansion.

Do I need an engineer for a small install? Not always, but heights and local rules may require one. Check our overview of stamped rack drawings.


Planning rack for a Lewisville or Flower Mound space?

Send us your dimensions and pallet specs, and we will tell you what ships from stock.

Request a Quote →