Cantilever Rack in Stillwater and Washington County
November 15, 2026

Stillwater and Washington County businesses can order stock cantilever rack, 12 and 16 foot columns with 48 and 60 inch arms, by freight to their yard or dock. Tight lots and river-valley moisture favor compact single-sided runs and galvanized finish outdoors. Quick-ship items typically dispatch within 48 to 72 hours of ordering.
The St. Croix valley is not a typical flat industrial market. Lots slope, yards are small, and the river brings damp air much of the year. Those facts shape what cantilever rack makes sense.
What kinds of storage show up here?
The area around Stillwater, Oak Park Heights and the communities along MN-36 and MN-95 has building-supply yards, contractors, light fabricators and small distributors. Typical long-stock storage includes:
- Lumber and millwork for builders and remodelers
- Pipe, conduit and tube for contractors
- Steel and aluminum bar for small shops
- Fence, deck and landscape materials
For each, the same question comes first: what is your longest bundle, and how heavy is it? See the cantilever RFQ checklist.
What fits a small or sloped yard?
Space is the constraint. Choose layouts that use height and edges:
- Single-sided runs along a wall or fence keep the middle of the yard open. See single-sided vs. double-sided cantilever
- 16-foot columns add levels without adding footprint, if your truck can reach. See 12-foot vs. 16-foot stock columns
- Level pads are essential. A pad that slopes will tilt a loaded column, so grade it flat before the rack arrives
- Short arms save aisle width. See 48-inch vs. 60-inch arms
What does river-valley moisture mean for rack?
Damp air, fog and spring flooding in low spots raise corrosion risk. Galvanized finish is the safer choice outdoors and in damp sheds. Keep bases out of standing water, and make sure drainage runs away from the pad. See galvanized vs. powder-coated cantilever in Minnesota winters and unheated pole barns.
How does winter change the plan?
Snow piles up fast on a small lot. Plan where plowed snow goes, so it does not bury the bottom arm or block the aisle. Keep arms clear of heavy snow loads. See snow and ice on outdoor cantilever arms and the snow load and bracing requirements guide.
What about footings and permits?
NAWL's product page calls for outdoor installs to anchor to a concrete pad at least 6 inches thick. Local frost conditions and your city's rules decide whether more is needed, and some jurisdictions want review for taller racks. Ask your building official early. See outdoor cantilever concrete pads and frost depth and permits for cantilever rack in Minnesota.
How does ordering work?
Stock columns, arms and bases ship by freight carrier. Transit time depends on the carrier and your location, so confirm it on your quote. You can also release the order to your own carrier. See how stock cantilever ships to Minnesota and using your own carrier.
NAWL supplies cantilever rack and components and does not install. Your crew or an installer handles assembly. Wholesale pricing requires a signed dealer agreement, which suits contractors who buy often.
How far is this from the Twin Cities?
Stillwater sits on the east edge of the metro, so you can compare it with our Twin Cities coverage in Cantilever Racking in St. Paul and Cantilever Racking in Minneapolis. The same stock lineup applies across the 200-mile radius.
Frequently asked questions
Can I fit cantilever rack in a small yard? Yes. Single-sided runs on a wall or fence use the least space.
Do I need galvanized near the river? For outdoor rack, it is usually worth it. Damp air attacks paint.
Can stock rack ship to Stillwater quickly? Stock items typically dispatch within 48 to 72 hours, and transit follows. Confirm on your quote.
Racking long stock in Stillwater?
Send your longest bundle, yard size and finish needs, and we will quote stock columns, arms and bases.